Basic Info.
Technics
Semiconductor IC
Power Supply Voltage
10V ~ 20V
Working Temperature
-40~125(Celsius )
Packaging
Tape & Reel (Tr)
Transport Package
Reel&Box
Product Description
Product Description
The FAN73892 is a monolithic three-phase half-bridge gate-drive IC designed for high-voltage, high-speed,driving MOSFETs and IGBTs operating up to +600 V.Fairchild's high-voltage process and common-mode noise-canceling technique provide stable
operation of high-side drivers under high-dv/dt noise circumstances.An advanced level-shift circuit allows high-side gate driver operation up to VS = -9.8 V (typical) for VBS =15 V.The protection functions include under-voltage lockout and inverter over-current trip with an automatic faultclear function. Over-current protection that terminates all six outputs can be derived from an external currentsense resistor. An open-drain fault signal is provided to indicate that an over-current or under-voltage shutdown
has occurred. The UVLO circuits prevent malfunction when VDD and VBS are lower than the threshold voltage.Output drivers typically source and sink 350 mA and 650 mA, respectively; which is suitable for three-phase half-bridge applications in motor drive systems.
Product Parameters
1.Pin diagram:
2.Absolute Maximum Ratings:
Stresses exceeding the Absolute Maximum Ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TA=25°C, unless otherwise specified.
| Symbol | Parameter | Min. | Max. | Unit |
| Vs | High-Side Floating Offset Voltage | VB1,2,3-25 | VB1,2,3+0.3 | V |
| Vb | High-Side Floating Supply Voltage | -0.3 | 625.0 | V |
| Vdd | Low-Side and Logic-Fixed supply voltage | -0.3 | 25.0 | V |
| V(ho) | High-Side Floating Output Voltage VHO1,2,3 | VS1,2,3-0.3 | VB1,2,3+0.3 | V |
| V(lo) | Low-Side Floating Output VoltageVLO1,2,3 | -0.3 | VDD+0.3 | V |
| V(in) | Input Voltage ( , , CS, and EN) | -0.3 | 5.5 | V |
| V(FO) | Fault Output Voltage ( FO) | -0.3 | VDD+0.3 | V |
| PW(HIN ) | High-Side Input Pulse Width | 500 | | ns |
| dVs/dt | Allowable Offset Voltage Slew Rate | | ±50 | V/ns |
| P(D) | Power Dissipation(2,3) | | 1.4 | W |
| θ(JA) | Thermal Resistance | | 70 | °C/W |
| T(J) | Junction Temperature | | 150 | °C |
| T(STG ) | Storage Temperature | -55 | 150 | °C |
Notes:
2. Mounted on 76.2 x 114.3 x 1.6mm PCB (FR-4 glass epoxy material). Refer to the following standards:
JESD51-2: Integral circuit's thermal test method environmental conditions, natural convection;
JESD51-3: Low effective thermal conductivity test board for leaded surface-mount packages.
3. Do not exceed maximum power dissipation (PD) under any circumstances.
3.Electrical Characteristics:
VBIAS (VDD, VBS1,2,3) = 15.0 V and TA = 25°C unless otherwise specified. The VIN and IIN parameters are referenced to COM and are applicable to all six channels. The VO and IO parameters are referenced to VS1,2,3 and COM and are applicable to the respective output leads: HO1,2,3 and LO1,2,3. The VDDUV parameters are referenced to COM. The VBSUV parameters are referenced to VS1,2,3.
| Symbol | Parameter | Condition | Min. | Typ. | Max. | Unit |
| Low-Side Power Supply Section |
| I(QDD) | Quiescent V(DD) Supply Current | V(LIN1,2,3)=0 V or 5 V, EN=0 V | | 200 | | μA |
| I(PDD) | Operating V(DD) Supply Current | f(LIN1,2,3)=20 kHz, rms Value | | 500 | | μA |
V(DDUV+)
| V(DD) Supply Under-Voltage
Positive-Going Threshold | V(DD)Sweep | 7.5 | 8.5 | 9.3 | V |
| V(DDUV-) | V(DD)Supply Under-Voltage Negative-Going Threshold | V(DD)=Sweep | 7.0 | 8.0 | 8.7 | V |
V(DDHYS)
| V(DD) Supply Under-Voltage Lockout Hysteresis | V(DD)=Sweep | | 0.5 | | V |
| Bootstrapped Power Supply Section |
V(BSUV+)
| V(BS) Supply Under-Voltage Positive-Going
Threshold | V(BS1,2,3)=Sweep | 7.5 | 8.5 | 9.3 | V |
| V(BSUV-) | V(BS)Supply Under-Voltage
Negative-Going Threshold | V(BS1,2,3)=Sweep | 7.0 | 8.0 | 8.7 | V |
V(BSHYS)
| V(BS) Supply Under-Voltage Lockout Hysteresis | V(BS1,2,3)=Sweep | | 0.5 | | V |
| I(LK) | Offset Supply Leakag Current | V(B1,2,3)=V(S1,2,3)=600 V | | | 10 | μA |
| I(QBS) | Quiescent V(BS) Supply Current | V(HIN1,2,3)=0 V or 5 V, EN=0 V | 10 | 50 | 80 | μA |
| I(PBS) | Operating V(BS) Supply Current | f(HIN1,2,3)=20 kHz, rms Value | 200 | 320 | 480 | μA |
| Gate Driver Output Section |
| V(OH) | High-Level Output voltage, V(BIAS)-V(O ) | I(O)=0 mA (No Load) | | | 100 | mV |
| V(OL) | Low-Level Output voltage, V(O) | I(O)=0 mA (No Load) | | | 100 | mV |
| I(O+) | Output HIGH Short-Circuit Pulse Current(4) | V(O)=15 V, V(IN)=0 V with
PW≤10 µs | 250 | 350 | | mA |
| I(O-) | Output LOW Short-Circuit Pulsed Current(4) | V(O)=0 V, V(IN)=5 V with PW≤10 µs | 500 | 650 | | mA |
V(S)
| Allowable Negative VS Pin Voltage for HIN
Signal Propagation to HO | | | -9.8 | -7.0 | V |
| Logic Input Section |
| V(IH) | Logic "0" Input Voltage | | 2.5 | | | V |
| V(IL) | Logic "1" Input Voltage | | | | 0.8 | V |
| I(IN+) | Logic Input Bias Current (HO=LO=HIGH) | V(IN)=0 V | | 100 | | μA |
| I(IN-) | Logic Input Bias Current (HO=LO=LOW) | V(IN)=5 V | | 8.5 | 25 | μA |
| R(IN) | Logic Input Pull-Up Resistance | | | 50 | | KΩ |
| Enable Control Section (EN) |
| V(EN+) | Enable Positive-Going Threshold Voltage | | 2.5 | | | V |
| V(EN-) | Enable Negative-Going Threshold Voltage | | | | 0.8 | V |
| I(EN+) | Logic Enable "1" Input Bias Current | V(EN)=5 V (Pull-Down=150KΩ) | | 33 | | μA |
| I(EN-) | Logic Enable "0" Input Bias Current | V(EN)=0 V | | | 2 | μA |
| Over-Current Protection Section |
| V(CSTH+) | Over-Current Detect Positive Threshold(4) | | 400 | 500 | 600 | mV |
| V(CSTH-) | Over-Current Detect Negative Threshold(4) | | | 440 | | mV |
| V(CSHYS) | Over-Current Detect Hysteresis(4) | | | 60 | | mV |
| I(CSIN) | Short-Circuit Input Current | V(CSIN)=1 V | 5 | 10 | 15 | μA |
| I(SOFT) | Soft Turn-Off Sink Current | | 25 | 40 | 55 | mA |
| Fault Output Section |
| V(RCINTH+) | RCIN Positive-Going Threshold Voltage | | | 3.3 | | V |
| V(RCINTH-) | RCIN Negative-Going Threshold Voltage | | | 2.6 | | V |
| V(RCINHYS) | RCIN Hysteresis Voltage | | | 0.7 | | V |
| I(RCIN) | RCIN Internal Current Source | C(RCIN)=2 nF | 3 | 5 | 7 | µA |
| V(FOL) | Fault Output Low Level Voltage VCS=1 V, IFO=1.5 mA | | | 0.2 | 0.5 | V |
| R(DSRCIN) | RCIN On Resistance | I(RCIN)=1.5 mA | 50 | 75 | 100 | Ω |
| R(DSFO) | Fault Output On Resistance | I(FO)=1.5 mA | 90 | 130 | 170 | Ω |
Detailed Photos
Our Advantages
why choose us :
advantage:
1.Produce Range:
Yangjiang RUIXIAO Enterprise Co,.Ltd,major in the electronic component , who have wide range of products,
such as IC,resistor , capacitor , mosfet , diodes, module , LED, relay, lcd. pcb board . and so. the brand involves:SHARP, POWER, NS, ON, ST , IR, VISHAY , TOSHIBA, FAIRCHILD,MICROCHIP, ATMEL,EVERYLIGHT all the kinds of electronic component you need will be find in here.
2.Scope of application:
the product is widely used in Automotive industry control,new energy industry,Audio,Home appliances equipment,Communication industry.it can meet the diverse needs of customers
3.Production workshop:
4.service:
with the "User first, customer first" Company motto, quality assurance , economic price, fast Delivery time is our only faith. we will try our best to make every customer to enjoy the the most flexible,efficient services.We sincere hope that we can seek the common development and cooperation with the customer together to achieve a win-win situation.
Packaging & Shipping
Logistics:
we can send the goods to the customer's country directly by the international logistics.no matter send by air or by sea.
we will try our best to let the customer to get the parcel more convenient .
(noted:Not bear any fee and tax of the transportation cost.)
Address:
1/F, Building4, 5 Allay, No. 1 Street, Nanpai Housing Estate, Jiangcheng District, Yangjiang City, Guangdong Province, China.
Business Type:
Trading Company
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Lights & Lighting, Tools & Hardware
Company Introduction:
Yangjiang RUIXIAOCo., Ltd major in the electronic component with full experience, we cooperate with the factory, and provide the good quality stock for years, we are focus on the foreign trade, we make the deal and send the goods to suctomer all over the world, Committed to the whold BOM, all the product we will preparing for you, such as the IC, TRANSISTOR, MOSFET, MODULE, LED, RELAY, or other else. And with the concept of honestly management and the customer′s requirement, we will give you the best service which include high quality and the best price. Otherwish, for the shipping, we have our own shipping partner, what ever the customer want to send send sea or by air, we will both meet your demand.
The producet as widety used in Automotive industrycontrol, newenergy, audio home appliance equipment, communication industry, it will meet the diverse needs of the customers.
The major brand it haves: SHARP, POWER, NEX, NXP, NS, ON, ST, IR, VISHAT, Toshiba, FAIRACHILD, MICROCHIP, ATMEL, EVERYLIGHT.
SERVICE PURPOSE:
"User First, customer first" is the only service purposes of our company with the advantage of goods delivery to foreign address. Quality assurance complete variety product.
We can send the goods to the customer′s country directly by the international logistics. No matter send by air or by sea.
We will try our best to let the customer to get the parcel more convenient.
(noted: Not bear any fee and tax of the transportation cost. )
DEVELOPMENT
We move to the high -tech field conditinuously, we sincere hope that we can seek the common development and cooporation with the customer together to achieve a win-win situation.
